RoHS Wall Thickness 0.7mm High Flame Retardant Grade Heat Shrink Tube

Product Description

Basic information

Item		CL-HFT
Continuus Temperature Range		-40ºC-125ºC
Radial Shrinking Ratio		2:1    3:1
Longitudinal Shrinking Ratio		±5%
Tensile Strength		≥10.4MPa
Elongation Ratio		≥200%
Aging in circulating-air oven		(158±1.0)ºC,7days
After aging	Tensile Strength	≥7.3MPa
	Elongation Ratio	≥100%
Dielectric Voltage Withstand		600V
Corrosion of Bare Copper		≥15kV/mm
Flammability		VW-1
Concentricity		≥65%

Product Description
Environment Friendly Heat Shrinkable Tube uses specially designed formulation of high polymers, through cross-link by electronic accelerator and continuous expansion.

The properties of environment-friendly, flexibility flame retardant, quick shrink and stable performance make them widely used in the field of electronics, communication, automotive, pipeline protection and so on. It is widely applied for connecting or end-handing, electric wire, insulating and harness of electric wire, corrosion and rust-proof of metallic rods or tubes, gas pipeline and marking for other products.
 

Size	As Supplied		After Recovery		Packing Length
	ID (Inside Diameter)	T(Wall-thickness)	ID (Inside Diameter)	T(Wall-thickness)	(Meter/Roll)
Φ1.5	2.00±0.30	0.20±0.08	≤0.80	0.40±0.08	200
Φ2.0	2.50±0.30	0.20±0.08	≤1.00	0.42±0.08	200
Φ2.5	3.00±0.30	0.22±0.08	≤1.25	0.42±0.08	200
Φ3.0	3.50±0.30	0.25±0.10	≤1.50	0.46±0.10	200
Φ3.5	4.00±0.30	0.25±0.10	≤1.75	0.46±0.10	200
Φ4.0	4.50±0.30	0.25±0.10	≤2.00	0.48±0.10	200
Φ4.5	5.00±0.30	0.25±0.10	≤2.25	0.50±0.10	100
Φ5.0	5.50±0.40	0.25±0.10	≤2.50	0.50±0.10	100
Φ6.0	6.50±0.40	0.28±0.12	≤3.00	0.56±0.10	100
Φ6.5	7.00±0.40	0.28±0.12	≤3.25	0.56±0.10	100
Φ7.0	7.50±0.40	0.30±0.12	≤3.50	0.58±0.10	100
Φ8.0	8.50±0.50	0.30±0.12	≤4.00	0.60±0.10	100
Φ9.0	9.50±0.50	0.30±0.12	≤4.50	0.60±0.10	100
Φ10	10.50±0.50	0.36±0.12	≤5.00	0.72±0.12	100
Φ11	11.50±0.50	0.36±0.12	≤5.50	0.72±0.12	100
Φ12	12.50±0.50	0.36±0.12	≤6.00	0.72±0.12	100
Φ13	13.50±0.50	0.36±0.12	≤6.50	0.72±0.12	100
Φ14	14.50±0.50	0.36±0.12	≤7.00	0.72±0.12	100
Φ15	15.50±0.50	0.36±0.12	≤7.50	0.72±0.12	100
Φ16	16.50±0.50	0.36±0.12	≤8.00	0.72±0.12	100
Φ17	17.50±0.50	0.36±0.12	≤8.50	0.72±0.12	100
Φ18	18.70±0.60	0.40±0.15	≤9.00	0.78±0.15	100
Φ20	20.70±0.60	0.40±0.15	≤10.0	0.80±0.15	100
Φ22	22.70±0.70	0.46±0.20	≤11.0	0.86±0.15	100
Φ25	25.70±0.70	0.46±0.20	≤12.5	0.90±0.15	50
Φ28	29.00±0.70	0.46±0.20	≤14.0	0.95±0.20	50
Φ30	31.00±1.00	0.46±0.20	≤15.0	1.00±0.20	50
Φ35	36.00±1.00	0.50±0.22	≤17.5	1.00±0.20	50
Φ40	41.50±1.50	0.50±0.25	≤20.0	1.15±0.25	50
Φ45	46.50±1.50	0.50±0.25	≤22.5	1.15±0.25	50
Φ50	52.00±2.00	0.60±0.25	≤26.0	1.20±0.25	50
Φ55	≥55.00	0.60±0.25	≤28.0	1.20±0.25	50
Φ60	≥60.00	0.60±0.25	≤30.0	1.20±0.25	50
Φ70	≥70.00	0.70±0.30	≤35.0	1.20±0.25	50
Φ80	≥80.00	0.70±0.30	≤40.0	1.25±0.25	25
Φ95	≥90.00	0.70±0.30	≤45.0	1.45±0.25	25
Φ100	≥100.00	0.70±0.30	≤50.0	1.45±0.25	25

Special specifications, wall thickness can be customized.